bricklin
[Top] [All Lists]

RE: Interior door release switch

To: "Bricklin" <bricklin@autox.team.net>
Subject: RE: Interior door release switch
From: "GREGORY MONFORT" <WINGRACER@msn.com>
Date: Mon, 16 Jun 97 03:49:45 UT


Hi All,

The switches and bezels were originally custom made by Cutler-Hammer Specialty 
Products Div. I was told circa 1977 that they only made one production run 
before Bricklin went out of business. As of 1994 they still made similar 
switches and bezels, but not identical. They made a version that's illuminated 
also.

Regards,

GM
----------
From:   owner-bricklin@autox.team.net on behalf of John T. Blair
Sent:   Saturday, June 14, 1997 4:08 PM
To:     "iaronson@epix.net"@epix.net; Bricklin@autox.team.net
Subject:        Re: Interior door release switch

At 05:20 AM 1/1/90 -0500, you wrote:
>John, 
>
>One of my interior door switches which operate the doors from the inside
>seems to be going bad. It will release the door to go up but not down.
>Do you happen to know fo a cross reference for that part or any
>alternative idea??

Irwin,

   Unfortunately I don't.  I haven't dug out my wiring harness yet.  It's
still in some box, someplace.  I was hoping to try and find some cross ref.
for all the switches when I start putting that back in the body.

   You might take it out and see if there are any manufacturers stampings
on it.  If you have any big electrical supply shop in you area, that it to
them and see what they can figure out.

   Let me know what you find out.  If all else fails, try calling Terry
or Bob.  Roy Dunn may even have some.

   Good luck, and sorry I can't be of more help on this subject at this 
time.  Maybe someone else on the mailing list as found a replacement.  I'm
forwarding this to the list.  Hopefully, we'll get a reply.

John
>
John T. Blair  WA4OHZ          email:  jblair@nhr.com
Va. Beach, Va                  Phone:  (757) 495-8229

48 TR1800    48 #4 Midget  65 Morgan 4/4 Series V
     75 Bricklin SV1   77 Spitfire



<Prev in Thread] Current Thread [Next in Thread>