At 12:26 PM 4/7/98 -0700, giandtb@mb.sympatico.ca wrote:
>.....
>1) says this compressor takes a 35 amp in line fuse . Can only find a
>30 or 40 amp fuse Which should I use?
George, go with the 40amp if it is NOT a slow blow. Can you see the
metal strip in it? It should be a plain metal strip. I don't know
what the surge current is, but using a fast blow (normal) 30 amp.
fuse you run the risk if it blowing quite often when the compressor
kicks in. If you can find a 30A slow blow you could try that. The
slow blow is designed to withstand the surge current.
John
John T. Blair WA4OHZ email: jblair@exis.net
Va. Beach, Va Phone: (757) 495-8229
48 TR1800 65 Morgan 4/4 Series V
71 Saab Sonett III 75 Bricklin SV1 77 Spitfire
|