bricklin
[Top] [All Lists]

Re: Firing Order for 351W

To: "George F. Hamstra" <hostage@ameritech.net>
Subject: Re: Firing Order for 351W
From: Jim & Ginny <jim-ginny@home.com>
Date: Mon, 19 Jun 2000 20:46:25 -0400
The firing order is right, your spark plug #'s are off.
The passenger side bank goes 1,2,3,4, from front to back. Your driver
side bank goes 5,6,7,8 from front to back.
LOL
Jim
1191

"George F. Hamstra" wrote:
> 
> Greetings!
>     I know the firing order for the 351W is: 1,3,7,2,6,5,4,8
> The question really is, "How are the cylinders numbered?"
> I know I could pull the valve covers, set to TDC, etc. etc. to figure
> it out, but someone probably knows.  I thought the numbering was:
> 
> (Front of car)
> 1    2
> 3    4
> 5    6
> 7    8
> (driver)
> 
> I also thought that they could be numbered
> 
> (Front of car)
> 1    5
> 2    6
> 3    7
> 4    8
> (driver)
> 
> Now the story behind this simple minded question!  8 years ago I took
> my Bricklin to American Auto Restorers (at 159th and Bell Rd, Homer
> Township, IL)  I made the mistake of paying him for all the work we
> outlined to be done in advance, so after he had my money the priority
> dropped till my lawyer suggested he finish the project...)  Well, to
> make a LONG story short, I recently got the car back.  The body and
> paint job look nice but it runs like crap! (33K original miles).  He
> added a 650 Holley, aluminum manifold, headers, etc. and now it runs
> worse than when he began working on it 8 years ago!  I decided to
> check some of his (lack of?) workmanship.  I replaced a fuel pump that
> was spraying raw gas on the block, replaced rotten fuel lines, etc.
> This had no effect on the backfiring, and lurching under acceleration,
> so I decided to see if he could have possibly screwed up the firing
> order.  If example #1 above is correct, the current wiring is:
> 1,3,4,5,6,2,7,8.  If I'm right, I'm lucky its starting, let alone
> running.
> 
> Later,
>     George

<Prev in Thread] Current Thread [Next in Thread>