datsun-roadsters
[Top] [All Lists]

Re: [Roadsters] SRL cam tower shim question

To: datsun-roadsters@autox.team.net
Subject: Re: [Roadsters] SRL cam tower shim question
From: Graeme Suckling <graemes@internode.on.net>
Date: Sun, 07 Nov 2010 16:55:58 +1030
On 7/11/2010 9:00 AM, Tim wrote:
> This may not be answerable but I am curious as I have a 2000 that might need 
>some head work next spring....
>
> Is there a common size used/needed for the cam tower shims? Or is the 
>thickness of the shim going to ALWAYS be based on how much has been cut off 
>the head's thickness?
>
> If I had shims made (I know someone who owns a machine shop), is any one in 
>need of or interested in acquiring a set(s) if I do get them made?
>
> Also, What is the best material to use for these shims?
>
> Thanks
>
> Tim
> Dairyland Datsuns
> ________________________________________
> Datsun-roadsters@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $16.00
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/datsun-roadsters/graemes@internode.on.net
 From memory, the shims are selected by the machinist to suit the 
dimension he is aiming for when re-surfacing the head, if necessary.
I found some old L series cam tower shims the other day and they 
appeared to be made out of plastic, nylon probably, others were metal.
My advice is to let the machinist work with what shims are available.

-- 
Regards,
Graeme S.
________________________________________
Datsun-roadsters@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $16.00
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>