I agree with John. I have run the lifters from British parts Northwest for
several years. I have yet to have a failure in my Gt-6. They also have
pretty good cams and heavy duty valve springs.
Andy Stark
72 EP Gt-6
>From: "John Wilkins" <john@race-dogs.com>
>Reply-To: "John Wilkins" <john@race-dogs.com>
>To: <fot@autox.team.net>
>Subject: Spitfire Lifters
>Date: Fri, 21 Mar 2003 14:11:44 -0800
>
>British Parts NW has hardened lifters for 56.00 a set!
>I've used 2 sets and work great and no abnormal wear. One cam has about 30
>race hrs on it and looks great!
>
>
>John Wilkins
>"66 Triumph Spitfire #892
>
>----- Original Message -----
>From: "A.J. & C. Wood" <wood@dandrade.freeserve.co.uk>
>To: <fot@autox.team.net>
>Sent: Friday, March 21, 2003 11:21 AM
>Subject: TR-6 Lifters
>
>
> > I have OEM lifters, nitride hardened, at circa $170 a set. These are not
> > modified in any other way.
> > Slightly less than PRI at $360 a set....
> > Jon Wood Classic Racecraft ----- Original Message -----
> > From: "Mike Munson" <fasttrs@mindspring.com>
> > To: <fot@autox.team.net>
> > Sent: Friday, March 21, 2003 12:45 PM
> >
> >
> > > Amici,
> > >
> > >
> > >
> > > Does anyone have a source for good hard lifters for a TR6? What
>hardness
> > > is recommended? I had some bad ones that wiped out a cam and want to
>be
> > > sure I replace them with good ones.
> > >
> > >
> > >
> > > Mike Munson
> > >
> > > Snellville, Ga.
_________________________________________________________________
Tired of spam? Get advanced junk mail protection with MSN 8.
|