fot
[Top] [All Lists]

Re: Cooling System

To: fot@autox.team.net
Subject: Re: Cooling System
From: Dave Riddle <dave@microworks.net>
Date: Thu, 03 Nov 2005 11:15:08 -0700
== fot at autox.team.net supported in part by Fat Chance Garage
==    http://fatchancegarage.com

I have used both without issue.  The last time I used them at the track the 
radiator in my Formula 500 sprung a leak in a seam along one side during a 
practice session running at Arizona Motorsports Park.  As I remember, the 
leak was slightly longer than 1". Drained the radiator.  Used some silicon 
sealer to put a temporary patch to stop the water flow when I refilled, 
while the sealer was setting up I left the track to run over to a Check 
Auto and bought some Bars. Got back, refilled the radiator with water and 
water wetter (with the silicon keeping the water in the cooled tank), 
poured in the indicated amount of stop leak and made it out for the 
Qualifying session. Never had a problem again with that radiator.  That was 
about three years ago.


===  unsubscribe/change address requests to majordomo@autox.team.net

<Prev in Thread] Current Thread [Next in Thread>