Re: [FOT] RE: Roller Rockers & cam failure

["Kas Kastner" <kaskas@cox.net>]

The system I used with great success for years was to have a bronze scroll
INSERT threaded down the stock iron guide (done at the machine shop).  No
extra clearance and they don't seem to wear.  When finally worn then you pull
out that scroll and thread in another, ream and finished. Stopped all my
problems with misfit rockers and valve stem contact.

Never Be beaten by Equipment
Kas Kastner


===  unsubscribe/change address requests to majordomo@autox.team.net