There was one made as i had one (recently) - ill check to see if it is
eother available or can be remade - but why not try the thin belt pulleys -
h
----- Original Message -----
From: <atenglish@mindspring.com>
To: <WEmery7451@aol.com>; <BillB@bnj.com>; <vintage.racer@comcast.net>;
<owner-fot@autox.team.net>; <fot@autox.team.net>
Sent: Monday, April 10, 2006 4:28 AM
Subject: Re: [FOT] Water Pump Pulley
>' I am not sure that they ever made an aluminum pulley for the wide stock
>TR belts.there is an excellent kit available over here for less than #100
>for the 3 pulleys and the belt.
Regards
Tony
>
> I have a wide belt aluminum pulley from a '70's SCCA TR4. I intend to keep
> it as a static display. Switch to the thin belt pulley. You will be gald
> that you did.
>
> Alan T
>
>
> === Help keep Team.Net on the air
> === http://www.team.net/donate.html
|