Re: [FOT] heim joint threaded rod source?

["R. John Lye" <rjl@gt-classics.com>]

At 08:26 PM 6/28/2006 -0400, J.C. Hassall wrote:
>I need to fabricate a throttle linkage for the Webers, but haven't been 
>able to find a source for the LH/RH threaded rod.

You may need to fabricate it yourself.  Get some aluminum rod, and
a left handed tap (http://www.pegasusautoracing.com has them, I
believe).  You'll use male ended heim joints with this setup.


R. John Lye

rjl6n@cstone.net