Here you go:
*Accelerator shaft bearings** *
The second note describes how one can fabricate higher quality accelerator
shaft bearings for the TR250 & TR6 that are easy to install.
You need two bushings and two collars per shaft:
Parts required: This requires two 3/8 ID collars, McMaster-Carr part #
6435K13 at $1.52. [get several]. Bearings are available with a 3/8" ID,
5/8" OD and 7/8" flange OD. The shortest one is =" long (McMaster-Carr part
#6338K461 --- $0.54 each).
chuck
On 8/27/06, Bill Babcock <BillB@bnj.com> wrote:
>
> I have a vague recollection of it but nothing helpful. But please, if you
> do
> find the source, repost and let the rest of us know, I'm building a
> semi-stocker TR3 and I don't like the standard linkage
>
> -----Original Message-----
> From: owner-fot@autox.team.net [mailto:owner-fot@autox.team.net] On Behalf
> Of Ed chan
> Sent: Sunday, August 27, 2006 9:10 PM
> To: Friends of Triumph
> Subject: [FOT] Anyone have information for TR6 Accelerator Brass Bushing
>
> All,
>
> I few years ago I remember seeing a tech tip about the accelerator bushing
> that is attached on the firewall.
>
> The article talked about replacing the two plastic bushings with a brass
> bushings (or brass roller bearing??).
>
> Now friend, Larry Rittinger, asked me about this bushing and I can't find
> any information. Doe anyone have information or a link on this brass
> bushing replacement??
>
> Thanks.
>
> Ed Chan
>
>
> ---------------------------------
> All-new Yahoo! Mail - Fire up a more powerful email and get things done
> faster.
>
>
> === Help keep Team.Net on the air
> === http://www.team.net/donate.html
>
>
> === Help keep Team.Net on the air
> === http://www.team.net/donate.html
>
--
Chuck Arnold
|