How true. I have seen too many rolls over the
years, and they are never good. Worked a
RallyCross this past weekend, had a Jeep roll
at the far end of the course. Someone had a
picture of him in the air, and he planned on
using it for the wallpaper on his computer!
--- Russ Moore <rem9@frontiernet.net> wrote:
> Mordy, with all due respect, having the engine stay
> together so you don't
> get to see all those fancy detailed parts is NOT a
> bad thing. Actually, not
> seeing the frame is also not a bad thing because
> typically when you do get
> to exhibit it to a number of folks, there is usually
> a significant amount of
> bodywork in your future. Not to mention bruises and
> diminished pockets.
>
> Best regards
>
> Russ Moore
>
> -----Original Message-----
> From: owner-fot@autox.team.net
> [mailto:owner-fot@autox.team.net]On
> Behalf Of Gasket Works USA
> Sent: Tuesday, September 19, 2006 9:04 PM
> To: fot@autox.team.net
> Subject: [FOT] New TR frames
>
>
> Fot...
>
> I purchased a TR frame from Tony at www.rat-co.com.
>
> The frame is an excellent in every respect,
> engineering, material selection
> and weldment. It has excellent fit, finish and is a
> pleasure to look at and
> work with.
>
> The sad part is that once the car is complete the
> only way to see the
> chassis is from the bottom.
>
> If you have ever had the oppurtunity to build an
> engine with all sorts of
> finely detailed expensive parts, rods, crank,
> pistons, oil pump..then have
> to seal it up so that none of those parts are
> visible. You get my drift.
>
>
> If you have the need for a chassis this is an
> outsanding value.
>
> Mordy
>
>
> === Help keep Team.Net on the air
> === http://www.team.net/donate.html
>
>
> === Help keep Team.Net on the air
> === http://www.team.net/donate.html
|