fot
[Top] [All Lists]

Re: [Fot] Reinserting TR4 tappets w/head on?

To: "J.C. Hassall" <jhassall@blacksburg.net>, "FoT" <fot@autox.team.net>
Subject: Re: [Fot] Reinserting TR4 tappets w/head on?
From: "Bill Babcock" <BillB@bnj.com>
Date: Sun, 12 Aug 2007 17:27:51 -0700
You should be able to fiddle it back in. sometimes they get cocked a little.
You might try a magnet applied to the edge while you hold the tappet down with
the pushrod. I've been able to get them back in when I do exactly what you
did--let the suction pull the tappet out.


-----Original Message-----
From: fot-bounces+billb=bnj.com@autox.team.net on behalf of J.C. Hassall
Sent: Sun 8/12/2007 11:30 AM
To: FoT
Subject: [Fot] Reinserting TR4 tappets w/head on?

I wasn't paying close enough attention when I removed the rocker
assembly this afternoon.  One of the pushrods pulled a tappet out of its
bore.  Oh sh*t!!  I've tried all I can think of to slip it back into the
bore.  It seems to sit at the top of the bore, but just doesn't want to
slide in.  So far I've avoided the BFH technique, but am running out of
patience and am *really* pissed at myself, so stepped away from it for
the afternoon.

Suggestions?  I really don't want to pull the head, as that will destroy
Uncle Jack's fantastic head gasket.

TIA

jim
--
J.C. Hassall
Blacksburg  VA
64 TR4 in autox preparation
99% finished, 40% to go
billb@bnj.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>