I had the same problem, and then found that others had this problem
as well. I solved mine by drilling out the carb body and float bowl
and putting in a larger bolt, hoping for a longer duration between failures.
At 03:35 PM 1/2/2008, Kramer, Robert wrote:
>I recently broke an HS6 float bowl retaining bolt. This bolt is a
>special 3/8" shoulder with a 1/4" course thread .........
.........
>BTW, I got black flagged for dumping fuel and avoided a potential fire
>with the float bowl suspended by the jet tube and 2 hoses.
The worst part is it screws up the mixture and you can't drive fast
enough to get away from the fire.
>Bob Kramer
>Sales Manager
>RDO Equipment Co.
>16415 North IH 35
>Pflugerville, TX 78660
>512-272-4141
>Fx 512-272-9365
>_______________________________________________
>http://www.team.net/donate.html
>
>Fot mailing list
>Fot@autox.team.net
>http://autox.team.net/mailman/listinfo/fot
uncle jack
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|