Moss sells the can for 80 bucks, revington tr sells an alum can for 84=A3.=
And a Stainless steel can for 152=A3. I want to leak test mine before pla=
cing an order. Since I have both the clutch and brake master cyls out, now=
would be a good time to switch to a dual mc setup for the brakes. I've re=
ad all the posts about the dual mc setups. Revington's ready-made setup is=
about 1500 bucks plus shipping. What is the least expensive way to go tha=
t is still extremely safe?
------Original Message------
From: Kramer, Robert
Sender: fot-bounces@autox.team.net
Cc: fot@autox.team.net
Sent: Sep 24, 2008 9:28 AM
Subject: Re: [Fot] Brake/clutch fluid res.
These cans may be available new from the UK. When I bought my dual circuit =
brake setup it came with a brand new can. Seek and ye shall find.
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On Beh=
alf Of Randall
Sent: Wednesday, September 24, 2008 11:20 AM
Cc: fot@autox.team.net
Subject: Re: [Fot] Brake/clutch fluid res.
> and find your leak, then solder it.
That in itself is tricky with the original TR3 reservoir. It's soldered
together (with low temperature 'soft' solder) to begin with. So bringing
one spot to soldering temperature will soften the adjacent solder joint and
allow it to pull apart, etc.
I gave up and found another one that didn't leak.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Sent via BlackBerry from T-Mobile
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|