fot
[Top] [All Lists]

Re: [Fot] Metal Question

To: Billb@bnj.com, markconsultation@twcny.rr.com
Subject: Re: [Fot] Metal Question
From: chasgee@aol.com
Date: Sun, 04 Jan 2009 20:59:20 -0500
Actually, the cooling rate is not that important because the tabs are made from 
very mild (low carbon) steel.? Heat them up until they glow orange a little and 
just let them air cool.? Should be OK if they aren't already cracked.

Chuck


-----Original Message-----
From: Bill Babcock <Billb@bnj.com>
To: Mark Eginton <markconsultation@twcny.rr.com>
Cc: fot@autox.team.net
Sent: Sun, 4 Jan 2009 4:12 pm
Subject: Re: [Fot] Metal Question



It will anneal them, which is not exactly the reknitting process you  
hope for, but it might relieve enough of the work hardening to keep  
them from breaking right away. You need to make sure to let the metal  
cool very slowly.
On Jan 4, 2009, at 1:48 PM, Mark Eginton wrote:

> As one of those classic projects that just keeps getting deeper, I  
> stripped
> the engine compartment of my TR 3. Picture the tabs used to bend  
> around the
> wiring harnesses that have been bent back and forth for 50 years. If  
> I heat
> them till red and let them cool slowly, will the atoms reknit  
> eliminating
> stresses from all the bending or will I end up with burnt toast?
>
> Happy New Years - got pistons etc for Christmas - Santa been berry  
> good to
> me...
>
> Mark
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>

Bill Babcock
Babcock & Jenkins
Billb@bnj.com
503.936.7660
www.bnj.com

Editor
Ke Nalu e-Magazine
Paddlesurfing's Web Journal

Bill@kenalu.com
www.kenalu.com
blog: www.ponohouse.com/ponoblog
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html

http://www.fot-racing.com

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>