fot
[Top] [All Lists]

Re: [Fot] help, please!

To: "Gasket Works" <gasket.works@verizon.net>, <RLEslEagle@aol.com>
Subject: Re: [Fot] help, please!
From: "Rocky Entriken" <rocky@spitfire4.com>
Date: Tue, 10 Feb 2009 11:47:33 -0600
Maybe back off the timing?

--Rocky

----- Original Message ----- 
From: "Gasket Works" <gasket.works@verizon.net>
To: <RLEslEagle@aol.com>
Cc: <fot@autox.team.net>
Sent: Tuesday, February 10, 2009 9:55 AM
Subject: Re: [Fot] help, please!


> Dick seems to have a problem... are there any mechanics who can help him?
>
> See below.
>
> md
>  ----- Original Message -----
>  From: RLEslEagle@aol.com
>  To: gasket.works@gte.net
>  Sent: Monday, February 09, 2009 7:45 PM
>  Subject: help, please!
>
>
>  Greetings.
>  I need the help of this amazing pool of Triumph experience--Dave Swauger 
> at
> The Roadster Factory suggested I write.  My car--a 1960 TR 3A.  Problem,
>  after an engine rebuild--TR 4A head; 86 mm sleeves & pistons; new Vicky 
> Brit
> street cam, lifters, & push rods; rebuilt SU carbs; etc, I have a
> smooth-running engine that will not go below 2,000 rpm.  I have checked 
> the
> following:
>  1.  The intake manifold flanges have been newly machined flat & do not 
> leak
> air (new gaskets, of course).  Same with carb to intake manifold--new 
> gaskets,
> no leakage.  Insulator blocks are the replacement plastic parts which do 
> not
> leak.
>  2.  The distributor to camshaft gear is aligned correctly and static 
> timing
> is at 4 degrees tdc.
>  3.  The vacuum advance is holding vacuum & not leaking air.  Pipe and
> connection at front carb okay.
>  4.  The carb needles are the correct normal codes.
>  5.  The carb rebuild included new shafts and bushings--no leakage with 
> the
> "carb spray test."
>  5.  The valve train is working as normal & is accurately gapped.
>
>  The 2,000 "idle" is smooth, not rough, but with the idle adjustment 
> screws
> entirely off their bases, the fast idle remains.  (The choke enrichment 
> cam is
> not hanging the throttle shaft.)  The only thing I can now imagine is that 
> my
> installation of the cam chain is one link off.  But wouldn't that result 
> more
> in an uneven idle than an idle twice as fast as normal but smooth?
>
>  Any help would be deeply appreciated.  The car is a nicely restored 
> example
> and I hope to get it on the road as soon as the Ohio winter retreats. 
> But,
> there is this idle problem...
>  Thanks!
>  Dick Eslinger
>  Dayton, Ohio
>
>
>
> -----------------------------------------------------------------------------
> -
>  The year's hottest artists on the red carpet at the Grammy Awards. AOL 
> Music
> takes you there.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html

http://www.fot-racing.com

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>