fot
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Fot] Porting and Polishing (and engine building tips in

from [Tony Drews] [Permanent Link][Original]
To: "Mark Eginton" <markconsultation@twcny.rr.com>,<fot@autox.team.net>
Subject: Re: [Fot] Porting and Polishing (and engine building tips in
From: Tony Drews <tony@tonydrews.com>
Date: Sat, 28 Feb 2009 11:50:18 -0600 
Don't bother polishing.  My understanding is that the polishing does 
more for the ego of the person receiving the polished part than it 
does for actual flow.

- Tony

At 11:37 AM 2/28/2009, Mark Eginton wrote:
>Fantastic - thanks
>
>I am still curious if I should get out my polishing compound or leave a slight
>grind finish...
>
>Cheers,
>
>M
>_______________________________________________
>Support Team.Net http://www.team.net/donate.html
>
>http://www.fot-racing.com
>
>Fot mailing list
>Fot@autox.team.net
>http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html

http://www.fot-racing.com

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Fot] Porting and Polishing (and engine building tips in, Bill Babcock
Next by Date:  Re: [Fot] Porting and Polishing (and engine building tips in, Randall
Previous by Thread:  Re: [Fot] Porting and Polishing (and engine building tips in, Bill Babcock
Next by Thread:  Re: [Fot] Porting and Polishing (and engine building tips in, Randall
Indexes:  [Date] [Thread] [Top] [All Lists]