fot
[Top] [All Lists]

Re: [Fot] TR4 oil system lead washer

To: fot@autox.team.net, "J.C. Hassall" <jhassall@blacksburg.net>
Subject: Re: [Fot] TR4 oil system lead washer
From: EDWARD BARNARD <edwardbarnard@prodigy.net>
Date: Fri, 24 Jul 2009 19:18:54 -0700 (PDT)
Jim: I use solder. I make a ring the same diameter as the screw out of a piece
of solder. When you tighten it down it seals great!
-Ed-

--- On Fri, 7/24/09, J.C. Hassall <jhassall@blacksburg.net> wrote:


From: J.C. Hassall <jhassall@blacksburg.net>
Subject: [Fot] TR4 oil system lead washer
To: fot@autox.team.net
Date: Friday, July 24, 2009, 9:14 PM


The lead washer which seals the oil pressure relief screw in the filter head
is NLA.  What are folks using as an effective replacement?

tia

jim

--
J.C. Hassall
Blacksburg VA
'63 TR4 in autox preparation
98.9% finished, 90% to go _______________________________________________
Support Team.Net http://www.team.net/donate.html

http://www.fot-racing.com

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html

http://www.fot-racing.com

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>