If the 3.7 is the "baseline" or 1.0, then the 3.45 would be 3.45 / 3.7 = .93
output. The standard OD is about .82 so the 3.45 would be the equivalent of
"half an overdrive", right? A friend of mine has a 3.45 and is considering
an A-type OD so he would end up with .93 x .82 = .76. That's quite a
reduction. Great for the open road but probably not for racing.
Mike
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net]On
Behalf Of Robert M. Lang
Sent: Wednesday, December 30, 2009 6:36 PM
To: Barr, Scott
Cc: fot@autox.team.net
Subject: Re: [Fot] O/D
On Wed, 30 Dec 2009, Barr, Scott wrote:
> But does that give you the 0.80 overdrive gear?
NO, but a 3.45 gear in the diff does.
:-)
> Scott
rml
---------------------------------------------------------------------------
Bob Lang Triumph TR6!! | This space for rent
2009 NER Solo Chair |
Voice:617-253-7438 | Cell: 339-927-4489
---------------------------------------------------------------------------
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
|