Aaron,
Radius arm to pivot brackets and links- 3/8"x24 tpi x 2 1/4" bolt
Spring to vertical link 7/16"x20 bolt approx 3" (factory manual didn't
list length)
Inner Tie Rod to outer tie rod thread 1/2x20 thread
HTH
Jim
Dallas
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of fpspitfire@comcast.net
Sent: Tuesday, April 27, 2010 4:11 PM
To: fot@autox.team.net
Subject: [Fot] spitfire bolt/thread sizes needed
Can someout out there tell me what the thread sizes are for the following
components on a spitfire...my car is 900 miles away so I don't have easy
access...
Inner Tie rod thread to ball joint
bolt for the Radius rod attachment to the chassis bracket or to the vertical
link
boltB through the spring at the top of the vertical link
aaron
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/jgambony@gcecisp.com
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.805 / Virus Database: 271.1.1/2837 - Release Date: 04/26/10
13:27:00
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|