fot
[Top] [All Lists]

Re: [Fot] TR6 Brake Pads

To: jhd11@hotmail.com, fot@autox.team.net
Subject: Re: [Fot] TR6 Brake Pads
From: chasgee@aol.com
Date: Tue, 25 May 2010 12:30:48 -0400
Based on my experience in a Lemons race with a TR7, buy the more expensive
pads.  We started with the off the shelf performance pads (Pep Boys type
stuff) and they lasted about 2 hours.  After we put proper race pads on, we
made it the rest of the way with no problems.  They were expensive, but
cheaper that replacing pads after every driver stint.

Good luck and enjoy the race.  If it is anything like Lemons, you will have a
blast!

Chuck





-----Original Message-----
From: Joe Henry <jhd11@hotmail.com>
To: fot@autox.team.net
Sent: Tue, May 25, 2010 8:25 am
Subject: [Fot] TR6 Brake Pads


     To add to the brake discussion;
     As some of you may or may not know, we are building a TR6 to go Chumpcar
acing (same principal as Lemons).  We will be using, initially at least,
tock discs,drums and calipers.  Since it is endurance racing we will need
everal sets of brake pads.  Are there any off the shelf performance pads for
he 6 that will work.  I spoke to the Carbotech people and they can have a pad
hat will work but a lot of $$!  Thanks in advance.
Joe Downer
iffRAF Racing
harlotte, N.C.
_________________________________________________________________
he New Busy think 9 to 5 is a cute idea. Combine multiple calendars with
otmail.
ttp://www.windowslive.com/campaign/thenewbusy?tile=multicalendar&ocid=PID283
6::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_5
______________________________________________
ot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
rchive: http://www.team.net/archive
orums: http://www.team.net/forums
nsubscribe: http://autox.team.net/mailman/options/fot/chasgee@aol.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>