The float bowls that i have , have a center bolt to hold the cap on , this
allows me to position the float arms any which way. Also prior owners put
the rear carb bowl to the front of the carb( so both float bowls are to the
right looking at the throats) for whatever reason . These carbs also vented
to the wheelhouse ............Mark P
----- Original Message -----
From: "Bob Kramer" <rkramer3@austin.rr.com>
To: <tylerpthompson@yahoo.com>
Cc: "Irv Korey" <ikorey@comcast.net>; "Triumph Friends of"
<fot@autox.team.net>
Sent: Thursday, June 24, 2010 6:22 PM
Subject: Re: [Fot] HS6 carb hesitation TR4
>I think the Volvo HS6 top work. I've bought a bunch of these over the years
>and converted them to TR4 spec. TR4 HS6's are expensive but you can buy a
>pair of Volvo's for $50 sometimes.
>
>
> Bob Kramer
> Volente, TX
>
> Perfection is not attainable, but if we chase perfection we can catch
> excellence.
> Vince Lombardi
> ----- Original Message -----
> From: <tylerpthompson@yahoo.com>
> To: "Irv Korey" <ikorey@comcast.net>; <emanteno@gmail.com>
> Cc: <fot-bounces@autox.team.net>; "Triumph Friends of"
> <fot@autox.team.net>
> Sent: Thursday, June 24, 2010 6:52 PM
> Subject: Re: [Fot] HS6 carb hesitation TR4
>
>
>> Joe Curto is going to see if he has other tops to address this issue.
>>
>> If not, he indicated he has seen some racers remove the ears on the tops
>> and use large washers to hold the tops down.
>> Ty
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/mpendy@dishmail.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|