Your altitude and cam have everything to do with timing.
What altitude do you drive and what kind/spec of cam ?
Jim G.
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of sherry robyn
Sent: Monday, July 04, 2011 2:27 PM
To: fot@autox.team.net
Subject: [Fot] TR6 timing with electronic ignition
What is the best method to time a 74 TR6 with a Pertronix ignitor and a
Crane
ignition module? I am using the stock distributor with both retard and
advance
lines disconnected. The car has triple Webers and headers with a
stock cam and
the car is not used on the street. I have been told that with
the Webers, I
will need to time it a little more advanced to get the benefit
of the carbs.
I had thought to start by using a vacuum guage to set the idle
timing and then a
timing light to see what it is doing at, say, 3000 and/or
4000 rpm. Does anyone
have any ideas on what degrees of advance I should
shoot for at the higher rpm?
Thanks, Jim in Folsom, CA
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/toodamnfunky@comcast.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|