fot
[Top] [All Lists]

[Fot] bleeding hydraulic throw out bearing

To: FOT team <fot@autox.team.net> (Win)/6.0.13_GA_2944)
Subject: [Fot] bleeding hydraulic throw out bearing
From: 19to1tr6@comcast.net
Date: Tue, 15 May 2012 20:54:04 +0000 (UTC)
Delivered-to: fot-archive@autox.team.net
Delivered-to: fot@autox.team.net
List-archive: <http://autox.team.net/pipermail/fot>
List-help: <mailto:fot-request@autox.team.net?subject=help>
List-id: Private List <fot.autox.team.net>
List-post: <mailto:fot@autox.team.net>
List-subscribe: <http://autox.team.net/mailman/listinfo/fot>, <mailto:fot-request@autox.team.net?subject=subscribe>
List-unsubscribe: <http://autox.team.net/mailman/options/fot>, <mailto:fot-request@autox.team.net?subject=unsubscribe>
Can i get a run down on the bleed procedure for a hydraulic bearing> In the
past i just let gravity do the work but i don't have the clutch peddle as
before, the shifts are sticky

as well as reverse grinds a lot to engage and hard to pull out I ran this on
jack stands up to about 3kB  rpmB B B thanksB  rob
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: 
http://autox.team.net/mailman/options/fot/fot-archive@autox.team.net



<Prev in Thread] Current Thread [Next in Thread>