MEMBERSHIP GOT TO CLEAR THE GARAGE, CAN'T TURN AROUND IN THERE. all OFFERS IF
NOT CRAZY WILL BE ACCEPTED:
Intake Manifold 307265 V2989 A 1147 aluminum intake I think??
Gear reduction starter R-33037
Koni Shocks (2) 80-1005
Trans Overdrive Unit 25/633301 015107 6 875 Laycock Tag info
Crankshaft WDB W2156 308737 17746N JOSB Supposedly a
new never run crank that has been hard chromed Mains are 2.3" and rods are
1.88"
Transmission 88306468 V3038 10 spline 1.15" Shaft
at the splines. Has aluminum bell housing with the slave @ 2 o clock and
starter on passenger side
Transmission 88306468 V3038 10 spline 0.90" Shaft
has aluminum bell housing with slave at 9 o clock and starter on left side
Lots and lots of other Spitfire and maybe GT6 tranny's too.
Block 311255 (between freeze plugs) FK5785HE, mains
are 2.44" recessed cylinder bores
Block 305380 (between freeze plugs) GA42748HE, by
dipstick is N111, mains are 2.130"
Block 307553 (between freeze plugs), Been decked so
no deck surface number, mains are 2.44" and the bore is 2.94"
Head 6 Port N61 by lifter area, T27, 304955
Head 8 port with D shaped exhaust outlet, 367871,
56
Head 8 port with round exhaust port outlet, RKO,
27B6, 0589
Crane Camshaft F-244 210-8, BN3437
Pistons 17753B
Cam bearings 1-363, CSB612, 730883M, 84-25-970
Push rods New chrome moly 6.0" length???
Mark Craig
Diesel Performance Parts, INC.
411 Allied Drive
Nashville, TN 37211
866-455-7788 Phone
615-834-9923 Fax
www.dieselperformanceparts.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Unsubscribe:
http://autox.team.net/mailman/options/fot/fot-archive@autox.team.net
|