fot
[Top] [All Lists]

Re: [Fot] Coil Overs at the Rear

To: Bobby Whitehead <igofaster@att.net>
Subject: Re: [Fot] Coil Overs at the Rear
From: Chuck Gee <chasgee@aol.com>
Date: Thu, 20 Dec 2012 07:44:24 -0800
Cc: FoT Triumph <fot@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
References: <BLU154-W89934FF8ECD9970CC150DBF300@phx.gbl> <SNT402-EAS44776164D37CABD601CBC9AB2300@phx.gbl> <95ACF40F-6A75-403D-839A-160DBFE11C14@aol.com> <1356017948.94522.YahooMailRC@web182202.mail.bf1.yahoo.com>
Just use the Spitfire mounting points to get the clearance.  You might need to
find the brackets that mount to the frame.

Chuck

On Dec 20, 2012, at 7:39 AM, Bobby Whitehead <igofaster@att.net> wrote:

> As far a coil overs on the rear of a GT6? I'm not an engineer buy on the
MKII
> and MKIII the shock towere is on the inside of the wheel well... I don't
think
> there is enough clearance without major modification to the wheel well to
adapt
> a mounting point.
> I believe the MKI used a shock mount that mounted somewhat to the frame
inside
> the back of the wheel well... I think there is a modification that I bought
from
> Rimmer Brothers a few years ago to attempt this type of mod... it went back
and
> forth with them because there was a bushing size issue or a clearance type
> issue... they finally refunded the whole purchase price without asking for
the
> bits and pieces back... maybe a few years later (I haven't looked) they got
the
> specifics right....
>
> Bobby
>
>
>
>
> ________________________________
> From: Christopher Bock <SeaCubeCo@aol.com>
> To: Vince G <vangoughv@hotmail.com>
> Cc: FOT List <fot@autox.team.net>
> Sent: Wed, December 19, 2012 10:52:37 AM
> Subject: Re: [Fot] Coil Overs at the Rear
>
> I did see the conversion from PRI.  It looks sweet and cool. If I had the
> green I would go for it.
>
> But...
>
> What about using coil overs and just a single leaf. Use the coil over to do
> the ride hight and ride control and let the leaf do the suspension geometry
> movements.
>
> Any thoughts on how that might work?
>
> Isn't there a picture and a small comment about this in one of Kas books?
>
> Chris
>
> On Dec 19, 2012, at 9:59 AM, Vince G <vangoughv@hotmail.com> wrote:
>
>> Charles, there are some set ups out there for the GT6 if you want a
> completely
>> new/more modern set up. I think PRI sells what looks like a good
> conversion.
>>
>> Im on a budget so I took the 15 dollar route and simply added a helper
> spring
>> to the top of the tired old transverse leaf stack. I bought a 2000#
trailer
>> spring at princess auto, used the longest leaf, de-arched it to achieve a
>> lower ride height and slipped it under the top plate that bolts down onto
> leaf
>> set up.  It was simple, cheap and easy to install and works really well.
> It's
>> nice that I didn't even have to pull the main leaf out in order to do this
> and
>> could out the helper easily and adjust the arch if need be.
>>
>> I left in the rotoflex setup and run on performance street tires. I figure
> I'm
>> less likely to break a hub or axle that way but that's just my opinion.
> When
>> I have a few grand to blow I may do the rear conversion.
>>
>> Sent from my iPhone
>>
>> On 2012-12-19, at 9:05 AM, "Charles WATSON" <clw2000@msn.com> wrote:
>>
>>> Friends:
>>>
>>> I see a lot of folks in various marquees (including Triumphs) using
>> coil-over
>>> shocks in the rear to supplement a tired leaf-spring.  I noticed Ratco is
>>> selling this as an upgrade to the TR suspension.  My question, especially
>> with
>>> regard to a rotoflex axle in my GT6 is, why not?
>>>
>>> benefits seem to be:
>>> - spring travels same path as shock
>>> - easily adjustable spring rate and height
>>>
>>> downsides:
>>> - possible space limitations (probably avoidable when going from donut to
>> CV)
>>> - what am I missing???
>>>
>>> If you're redoing the entire suspension anyway, is this not a good way to
>> go?
>>> And if not, has anyone tried the composite "leaf" springs and saved the
>> 40-50
>>> lbs of steel?
>>>
>>>
>>> Thanks,
>>>
>>> Chuck Watson
>>> _______________________________________________
>>> fot@autox.team.net
>>>
>>> http://www.fot-racing.com
>>>
>>> Donate: http://www.team.net/donate.html
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>> Unsubscribe:
>> http://autox.team.net/mailman/options/fot/vangoughv@hotmail.com
>> _______________________________________________
>> fot@autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe: http://autox.team.net/mailman/options/fot/seacubeco@aol.com
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/igofaster@att.net
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/chasgee@aol.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/fot/mharc@autox.team.net


<Prev in Thread] Current Thread [Next in Thread>