Hi all, Happy New Year.
I'm not sure about the TR4 head, but on my 6 where the heater hose pipe
comes out the top of the head near the rear, I tapped it to 3/8 pipe and
installed a reducer bushing and a petcock for bleeding out air from the
system. If you just want a plug, various places sell Allen head pipe plugs
in aluminum. Try Jegs or Pegasus.
British pipe threads are vary close to NPT sizes and can be tapped to NPT
sizes easily. I have a bunch of taps cluttering up my garage!
Bill
----- Original Message -----
From: "Jim Gray" <toodamnfunky@comcast.net>
To: "'FOT'" <fot@autox.team.net>
Sent: Sunday, December 30, 2012 11:22 PM
Subject: [Fot] TR4 upper head plugs
> Does anyone happen to know where to get the aluminum plugs in the top of
> the
> head ?
>
> Thanks as always
>
> jim g
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/fot/william.tobin31@verizon.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/fot/mharc@autox.team.net
|