I assume you've perused the Timken bearing catalog for the bearing
sizes. If not, I'd suggest that...
I've got a PDF of the applicable section of the catalog I've attached
(but will be stripped in the list's message).
Cheers, Tony
At 01:01 AM 12/23/2013, malaboge@aol.com wrote:
>Herebs the issue-
>
>
>Ibm workin on front suspension thatbs made up of GT6 styleuprights with
>TR4 style hubs. Theuprights are like the GT6 unit except that they are
>drilled for the TR4 taperedaxle (smaller than the GT6 axle). Ibve seen these
>uprights on some of the more esotericBritish bgarden shedbcars (TVRbs,
>Elvabs and Loti) so theybre not totallystrange. BUT, I want to put a set
>of thetrunionless uprights on this ride so that I do not suffer the indignity
>ofwatching one of the wheels leave the car at some inopportune moment!
>
>
>
>Herebs thefly in the ointmentb&they only make them for the GT6 stub axle.
>
>
>So, I can find a bearing that will fit the outer end of the GTaxle and TR hub,
>but not the inner. Seems the closest I can find is about 50 thou larger in
>O.D. So before I chuck the hub up and bore thebearing hole in the inner TR
>hub largerb& does anyone have a way to accomplish thissetup without my having
>to unscrupulously modify the TR hubs?
>
>
>Nick in Nor Cal
>_______________________________________________
>fot@autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/fot/tony@tonydrews.com
[demime 1.01d removed an attachment of type application/pdf which had a name of
BrgDimenIndex-Chap4.pdf]
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|