fot
[Top] [All Lists]

Re: [Fot] TR3 vs TR4 crank, differences?

To: Tim Murphy <timmurph@fastbytes.com> with any abuse report
Subject: Re: [Fot] TR3 vs TR4 crank, differences?
From: John Hasty <jhhasty@gdhs.com>
Date: Wed, 30 Jul 2014 23:50:06 -0400
Cc: "<fot@autox.team.net>" <fot@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
References: <000001cfac70$4a7e0080$df7a0180$@com>
Dream on.....

Sent from my iPhone

> On Jul 30, 2014, at 11:34 PM, "Tim Murphy" <timmurph@fastbytes.com> wrote:
>
> I'm thinking of prepping a crankshaft for our TR4 vintage racer.  I have at
> least one TR3 crankshaft, a TR4 crankshaft and one or two other unknown
> spares.  Are there any differences or are they the  same and can be used in
> a TR4?
>
>
>
> I first plan to have it crack checked and checked for straightness and
size.
> The next step would be balancing and lightening possibly?  Is there any
> significant advantage to polishing the crank, other than that it looks real
> pretty?  Then I was going to have it bead blasted and nitrided and finally
> ground  with the proper radiuses and fillets.  I have to review Kas's books
> to check for other tips.  I've got CRS disease (Can't Remember Stuff) and
> it's been awhile since I read some of those books!
>
>
>
> Thanks for the info and any other tips on crank prep.  Once I've got the
> "new" crank I'll install it on the following rebuild with the thought that
> with the forged pistons, Carrillo rods and the "new" crank, we should be
> able to use 6500 RPM reliably.
>
>
>
> Tim & Ryan 1961 BRG TR4 #317
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/jhhasty@gdhs.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>