Wow, I was wondering. That was some serious timing!
Cheers, Bill
----- Original Message -----
From: "Charly Mitchel" <charly@mitchelplumbing.com>
To: "Charly Mitchel" <charly@mitchelplumbing.com>; "sherry robyn"
<sherryjimmy6116@att.net>; <fot@autox.team.net>
Sent: Thursday, September 11, 2014 10:23 AM
Subject: Re: [Fot] Timing a TR6 for Webers
> Not sure why the degrees symbol didn't get posted properly, it should
> state 35 degrees, 107 degrees and 17 degrees, not 350, 1070 and 170,
> Sorry
> Charly Mitchel
> TR6 #44
> ----- Original Message -----
> From: "Charly Mitchel" <charly@mitchelplumbing.com>
> To: "sherry robyn" <sherryjimmy6116@att.net>; <fot@autox.team.net>
> Sent: Wednesday, September 10, 2014 4:31 PM
> Subject: Re: [Fot] Timing a TR6 for Webers
>
>
>>I run about 350 total advance on my full race motor.
>> I was once told you advance the distributor until the motor 'pings' and
>> then back it of a couple of degrees. I'm not sure if this is true with
>> race motors running on high octane fuel.
>> I run about 11:1 CR a D9 cam and fuel injection with my cam timing about
>> 1070.
>> I don't know what it is at idle, I'd guess about 170.
>>
>> Charly Mitchel
>> TR6 #44
>> ----- Original Message -----
>> From: "sherry robyn" <sherryjimmy6116@att.net>
>> To: <fot@autox.team.net>
>> Sent: Wednesday, September 10, 2014 4:25 PM
>> Subject: [Fot] Timing a TR6 for Webers
>>
>>
>>>I am trying to set the TOTAL timing on my 74 TR6. The motor is stock
>>>compression, mild cam, headers, electronic ignition, and triple dcoe 2
>>>Webers. It was an SCCA racer in the late 80s early 90s. I added the
>>>triple Webers and use it to autox and hillclimb. The distributor is a
>>>41306B. I am not interested in initial timing only total timing. If
>>>nothing else, please tell me your total timing and briefly describe your
>>>motor. Anything from a stock motor to full race motor are of interest
>>>but especially those with triple Webers.
>>>
>>> Thanks, Jim
>>> _______________________________________________
>>> fot@autox.team.net
>>>
>>> http://www.fot-racing.com
>>>
>>> Donate: http://www.team.net/donate.html
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>> Unsubscribe/Manage:
>>> http://autox.team.net/mailman/options/fot/charly@mitchelplumbing.com
>> _______________________________________________
>> fot@autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/fot/charly@mitchelplumbing.com
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/william.tobin31@verizon.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|