Thanks everyone, I may go through the drain plug short term and later in the
season get the pan off and weld the bung on and maybe try to add some capacity
at the same time
Brian
Brian Schirano
585-305-0349 Cell
BSchirano@yahoo.com
--------------------------------------------
On Sun, 3/22/15, Brian Schirano via Fot <fot@autox.team.net> wrote:
Subject: [Fot] Oil temp Gauge
To: "FOT List Triumph" <fot@autox.team.net>
Date: Sunday, March 22, 2015, 11:08 AM
OK Sixer
Friends
I want to
install an oil temp gauge in the GT6. I bought an
analog AccuTech
Sportsman gauge with a pretty big
install requirement, I'm guessing 5/8 - 18
(can't find the exact size in the specs) and the probe
extends an inch past the end of the
fitting.
I
have page 47 of
the Pegasus catalog earmarked for a Temp Gauge to
AN adapter that is supposed to work with a T fitting,
but seems it me the temp probe will block substantial
flow or not get enough flow past the probe for a good
reading. On the same page just above is a bloody $88 in line
adapter, one of my last choices.
Anywise -
besides welding a bung on the pan or above last choice,
I'm looking for other installation or adapter
suggestions.
Thanks B Brian
Schirano
585-305-0349 Cell
BSchirano@yahoo.com
-----Inline Attachment Follows-----
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/bschirano@yahoo.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
eam.net
|