That seems about what I'm running for lift. I'm running springs from
BFE and they don't bind. They seem close to the TR-4 springs sold by
Crower - I ended up with Crower titanium retainers when BFE went
offline (it's back under new ownership). Isky also has a spring set
for TR-4, not sure if those support that lift but I'm guessing they do.
www.BritishFrameandEngine.com / BFEparts@aol.com
Regards, Tony
At 12:52 PM 11/10/2016, toodamnfunky@comcast.net wrote:
>FoT,
>I'm changing cam spec this year and the new cam will lift at the
>valve to .549.
>Can anyone suggest a source for valve springs that will work with .549 ?
>_______________________________________________
>fot@autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/fot/tony@tonydrews.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|