fot
[Top] [All Lists]

[Healeys] Heat Shields

Subject: [Healeys] Heat Shields
From: 050.rpl at gmail.com (R. Lindsay)
Date: Sat, 4 Mar 2017 14:01:44 -0500
References: <D50A3006-4D5E-4C4B-B929-26BCF440EDCC@gmail.com> <jl2mbcpdbgtdne3jrfvmku233f0rj5nbet@4ax.com>
Thank you Roland. 

Price Lindsay

Cell: 630-841-6300
Email: 050.rpl at gmail.com

Sent from my iPhone

> On Mar 4, 2017, at 1:58 PM, sentenac.rw at gmail.com wrote:
> 
> It is a two-part refinishing process.  First part is two coats of
> Rustoleum Clean Metal Primer 7780830.  Then you apply a very light
> coat of MinWax Polyurethane Clear Satin to seal the surface and make
> it cleanable.  Both are spray cans and each can contains enough for a
> dozen cars :-)  You don't want the urethane to look shiny.  The
> instructions are included with Moss's kit.  The primer is a nice
> off-white that Roger found to match the original color.
> 
> -Roland
> BN1 #724 with heat shields installed but not ready for the road
> 
>> On Sat, 4 Mar 2017 12:24:51 -0500, you wrote:
>> 
>> I recall someone mentioning that Roger Moment developed a finish to apply to 
>> hardi board to make the finish like the original asbestos.  I?ve looked 
>> through the archives and on John Simm?s site and can?t find the note.  Does 
>> anyone know the finish he used or is there someone that can provide me with 
>> a proper finish?
>> 
>> Thank you in advance.
>> 
>> Price Lindsay
>> 67 BJ8
>> 
> 
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> 

<Prev in Thread] Current Thread [Next in Thread>