fot
[Top] [All Lists]

[Healeys] another BJ8 door striker question

Subject: [Healeys] another BJ8 door striker question
From: ghaywood at ec.rr.com (George Haywood)
Date: Sat, 11 Mar 2017 1:37:33 +0000
Ken, 
The packing plate goes on the shut face side but they go between the aluminum 
door finisher and the shut face pillar I'm pretty sure.  If I remember 
correctly I used a few choice expletives while getting the proper alignment and 
fit.

Hope this helps,

George Haywood
'65 bj8

   
---- goldengt at cal.net wrote: 
> On the BJ8 parts list, a packing plate for the door striker is shown but not 
> exactly. Should this packing plate be on the shut face side where it could 
> help move the striker in and out for an adjustment or should the plate be in 
> the fender well next to the threaded plate? Per my old parts I need to start 
> bending the reproduction stuff. Sticking the packing plate against the shut 
> face would help.Thanks,Ken Freese65 BJ8Note to Len- thanks for the picture, 
> but that is not the part that is worn on my car.

<Prev in Thread] Current Thread [Next in Thread>