fot
[Top] [All Lists]

[Healeys] Clutch bleeder?

Subject: [Healeys] Clutch bleeder?
From: bspidell at comcast.net (Bob Spidell)
Date: Thu, 11 May 2017 21:28:33 -0700
References: <2ac6915a3e0915ea6e4657988a21d5fb@usol.com>
Here's a shot of the business end.  Sorry, not gonna pull my 
transmission cover to get the other end ;) ... it's just a fitting into 
the clutch slave.  This was produced by the late Doug Reid, aka 'Mr. 
Finespanner.'  I think the best part was the simple but rugged bracket 
that was bolted to the bellhousing.

Discussion here: http://www.ahexp.com/phorum/read.php?3,184927

Bob



On 5/11/2017 1:11 PM, ggilliam at usol.com wrote:
>
>  A while back there was information on a bleeder line extension for 
> the clutch slave cylinder...does anyone know the particulars of the 
> construction, such as length and fittings required, a picture perhaps?
>
>  Also, the side curtains for my Longbridge BN4 have just been laying 
> in the boot for many years..would someone have a picture of the 
> storage bag they should be held in? The front brackets on mine look 
> home made..I'd like to see what they should really look like. Where 
> the brackets  removed for storage so the side curtains could lay flat 
> together?
>
>  Thanks for the help,
>
>  Gordy
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/bspidell at comcast.net
>
>

-------------- next part --------------
A non-text attachment was scrubbed...
Name: Bleeder.JPG
Type: image/jpeg
Size: 130527 bytes
Desc: not available
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170511/1c6d9dde/attachment.jpe>

<Prev in Thread] Current Thread [Next in Thread>