I believe I have several of these in good condition. I have lots of Spit
gearbox parts I don't use in the GT6
-----Original Message-----
From: barry rosenberg via Fot <fot at autox.team.net>
To: Peter Vucinic <pvucinic at netspace.net.au>; fot <fot at autox.team.net>
Sent: Thu, Feb 1, 2018 4:34 am
Subject: Re: [Fot] Spitfire Single Rail Gearbox
I clean out the inside of the gear in my lathe and make a bronze oil-lite
bearing for it. You can make the bushing a little longer for better support. I
do this all the time in TR3-6 gearboxes. Anyone competent with a lathe should
be able to do it.
Barry
On Thursday, February 1, 2018 4:18 AM, Peter Vucinic via Fot <fot at
autox.team.net> wrote:
Listers,
Does anyone know if the following part number Leyland part no. 22G 1818 cross
overs to/is the same as 154 829 15T (Layger, Single Rail Gearbox)
Also, is there a ?FIX? for the Single Rail Gearbox Laygear when the needle
rollers have damaged the bearing surface inside the gear? Or are we talking
?new gear? time?
Thanks in advance
"You can Make a Small Fortune From Motor Racing. As long as You Started With A
Lage Fortune!"
Kind Regards
Peter Vucinic
TR4 - TR7 V8 - Spitfire MkII
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20180201/7d04e1d5/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.jpg
Type: image/jpeg
Size: 4426 bytes
Desc: not available
URL:
<http://autox.team.net/pipermail/fot/attachments/20180201/7d04e1d5/attachment.jpg>
|
