healeys
[Top] [All Lists]

Re: [Healeys] Generator pulley

To: healeys@autox.team.net
Subject: Re: [Healeys] Generator pulley
From: "Warren Dietz" <flyhihealey@hotmail.com>
Date: Thu, 05 Jul 2007 12:09:32 -0400
   I have a late BJ8 with 3/8" pulley.

WD   67 BJ8



>David:
>
>Were there not 2 pulleys used on the late (BJ8) generator - both a 3/8" and
>then the 1/2"?  What I'm getting at is I believe that there were two 3/8"
>pulleys, one with the correct hole size for the BJ8 generator - so if Rick
>had the later 3/8" pulley, it should do what he wants it to.
>
>Earl Kagna
>Victoria, B.C.
>BT7 tri-carb
>BJ8
>
>----- Original Message -----
>From: "David Nock" <healeydoc@sbcglobal.net>
>To: "Rick Swain and Wendy Grant" <grain@auracom.com>
>Cc: "Healey List" <healeys@autox.team.net>
>Sent: Thursday, July 05, 2007 8:33 AM
>Subject: Re: [Healeys] Generator pulley
>
>
>No, the inside diameter is different.
>
>
>
>
>David Nock
>British Car Specialists
>Stockton Ca 95205
>209-948-8767
>
>www.britishcarspecialists.com
>.
>..
>
>On Jul 5, 2007, at 8:03 AM, Rick Swain and Wendy Grant wrote:
>
> > On a BJ8 generator with 1/2" pulley, can the pulley be replaced with
> > a 3/8" one without modification. In other words can a late generator
> > be used on an earlier car by simply replacing the pulley?
> >
> > Thanks
> >
> > Rick Swain
> > '59 BN4

_________________________________________________________________
Don't get caught with egg on your face. Play Chicktionary!  
http://club.live.com/chicktionary.aspx?icid=chick_hotmailtextlink2
_______________________________________________

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

<Prev in Thread] Current Thread [Next in Thread>