Stephen,
Sounds like the triggers are installed backwards. They should be in a V in
relation to each other.
Rich Chrysler
----- Original Message -----
From: "Stephen Hutchings" <s.hutchings@rogers.com>
To: <healeys@autox.team.net>
Sent: Sunday, September 09, 2007 9:05 PM
Subject: [Healeys] Trafficator question
> I've come across a problem I haven't seen covered with the
> trafficator. Before anyone suggests, I've looked at the many useful
> step by step photos on the various websites, and found them
> invaluable when I replaced the trafficator wiring a few years
> back....but!
> The portion of the cancelling mechanism which rotates and pushes back
> in the "triggers" also snags on the control arm when it reaches that
> part of the rotation, and pulls it over into a signalling position
> again....... It is tempting to slightly bend the metal cancelling
> piece that rotates, but I fear it wouldn't then be tight enough to
> cancel the "triggers".
> If anyone finds this unclear, but thinks they can help, I can email a
> drawing that explains the problem in a more graphic way.
>
> Thanks,
> Stephen, BJ8
> _______________________________________________
> richchrysler@quickclic.net
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|