Bob -
I used neoprene 1" Camper seal for this, and double or tripled up
until it was high enough to seal.
I also placed the whole tank on little 1" square bits of the same
Camper seal to help prevent corrosion of the tank on the other side,
as a metal-to-metal tight space will attract permanent moisture pools
under the tank.... Even in sunny California (don't ask how I know
this!).
Alan
On 3/13/09, Bob Spidell <bspidell@comcast.net> wrote:
> Listers,
>
> Anyone know the approximate thickness and composition of the
> square/cutout rubber seal/mat that goes under the fuel tank in a BN2?
>
> The usual suspects don't carry them and we need to fabricate.
>
> TIA,
> Bob
>
> --
> *******************************************************************
> Bob Spidell San Jose, CA bspidell@comcast.net
>
> "Not everything that can be counted counts, and not everything
> that counts can be counted." -- Albert Einstein
> *******************************************************************
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut@gmail.com
>
> http://www.team.net/archive
>
--
Sent from my mobile device
Alan
'52 A90
'53 BN1
'64 BJ8
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|