healeys
[Top] [All Lists]

Re: [Healeys] Smitty Speedo cable

Subject: Re: [Healeys] Smitty Speedo cable
From: I Erbs <eyera3000@gmail.com>
Date: Wed, 11 Jun 2014 13:23:28 -0700
Cc: Ahealey help <healeys@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
References: <CACPMnYrLW6uMA7XvzXMRLbBcr-BTupkUU4Q5tTYa7Lo0Dgvpjw@mail.gmail.com> <CAKBTmU7caddwO+GHeLTp45Xx0qfk+espx6qxdSbuQgqPhAyVPQ@mail.gmail.com> <CACPMnYr0aT2M7yDAVw0ejKwKkxTXT5C4z-4iGp1sHFaf0Lwzkg@mail.gmail.com> <8D153C6F34831CF-1AB4-185C0@webmail-va022.sysops.aol.com>
Smitty 5 speed kit uses a solid rear mount that eliminates the oem Healey
bits

Ira Erbs
Portland, OR
   _______                                  _______
     (______ \____1960 BT7____/ _______)
         (_________________________)


On Wed, Jun 11, 2014 at 1:00 PM, Larry Wendland <bighealey3k@aim.com> wrote:

> Ira,  Have you tried shortening the rear transmission mount link bolt
> where it passes through the vertical bracket on the  frame cross member.
>  It should have two nuts on the threaded shaft so you can pull the trans.
> and engine aft to maintain clearance between the radiator and cooling fan.
>  The links' purpose is to keep the engine from surging forward in a sudden
> stop and or minor collision in order to save the radiator and fan.
>
> Larry
> '67 BJ8
>
>
>
> -----Original Message-----
> From: I Erbs <eyera3000@gmail.com>
> To: jerry wall <jwbn6hrdtp@gmail.com>; Ahealey help <
> healeys@autox.team.net>
> Sent: Wed, Jun 11, 2014 5:57 am
> Subject: Re: [Healeys] Smitty Speedo cable
>
>
> Smitty 5 speed. No adjustment. Will measure Clearance. Just a hint of black
> paint at blade tips. Would bad motor mounts cause forward movement?
>
> I Erbs
> IT Consultant
> sent from smartphone, so what you read, may not be what I meant to send.
> On Jun 9, 2014 4:26 AM, "jerry wall" <jwbn6hrdtp@gmail.com> wrote:
>
>  ira,
>> you should have 3/4-1" clearance between any fan and the radiator.
>>
> make
>
>> sure your rear stabilizer bushings are in good shape. use poly ones
>>
> over
>
>> rubber.
>>
>>
>> On Sun, Jun 8, 2014 at 6:38 AM, I Erbs <eyera3000@gmail.com> wrote:
>>
>>  Using a BJ 8 Speedo cable for length. It won't screw onto adaptor
>>>
>> cable on
>
>> tranny side. end is too small. Do I need custom cable or ???
>>> Getting close.
>>> Also Texas cooler is just rubbing radiator. Picking up a bit of black
>>> paint. Will it flex more at higher speeds?  If so does a stock fan
>>>
>> flex
>
>> that much too? If not anyone have one to sell me or trade for Texas
>>> cooler?
>>>
>>> I Erbs
>>> IT Consultant
>>> sent from smartphone, so what you read, may not be what I meant to
>>>
>> send.
>
>> _______________________________________________
>>> Support Team.Net http://www.team.net/donate.html
>>> Suggested annual donation  $12.75
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>>
>>> Healeys@autox.team.net
>>> http://autox.team.net/mailman/listinfo/healeys
>>>
>>> Unsubscribe/Manage:
>>> http://autox.team.net/mailman/options/healeys/jwbn6hrdtp@gmail.com
>>>
>>>
>>>
>>
>> --
>> jerry wall  BN6
>> rowlett, tx
>>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/bighealey3k@aim.com
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


<Prev in Thread] Current Thread [Next in Thread>