Seeking the collective wisdom. When I installed the generator on my newly
rebuilt engine last December it was a tight fit. Fine, I thought. After
1,500 or so miles, Saturday the generator light comes on. Upon inspection,
the belt is intact, but I can turn the generator pulley by hand and the belt
has too much play. No problem, just tighten it up. Wrong. With all my
strength I can't get the generator to do more than barely wiggle with the
mounting bolts fully slackened. Thoughts on the best way to free up the
generator's up/down movement? I'll probably need to file down the ears a
bit to make for an easier fit.
Bruce Steele
Brea, CA
1960 BN7
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180809/42e822db/attachment.html>
|