healeys
[Top] [All Lists]

Re: [Healeys] current draw of wipers

To: m.g.sharp@sympatico.ca, healeys@autox.team.net
Subject: Re: [Healeys] current draw of wipers
From: Bob Haskell <rchaskell@earthlink.net>
Date: Sun, 14 Mar 2021 11:36:12 -0400
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=dk12062016; d=earthlink.net; b=i+T8q7HMP7QXxOXcHvd2NqzoiYQGV0ztdQl0HjbWI4M4EBYLKbY+jF/GbJegKbHPy0blxmsZuXOY18W5WDUJToWuW1lBJUO2KMZ/hSE9xkUkbun4VhuMnVM7iu7ZTaZ84UbuLquqnO7tOSWjXLAZ/IfJXEBS01okwOUO7l+sdKMZFYcTJ/XFfjuDGFLEThEnjI+D3WHsffxYWozhUcCGDasSKX4If3opCdKCT9/lWq8QQ5q87Hgz7jYlfUgL0I1m785gsL3FNo+LD2zdZso5KUXIveo9MWB8J669pi8fsd4lo0lY7DvIgX3jVF0KkkCbGnCkDTIT+T73zjbDGX+qLw==; h=Received:Subject:To:References:From:Message-ID:Date:User-Agent:MIME-Version:In-Reply-To:Content-Type:Content-Transfer-Encoding:Content-Language:X-ELNK-Trace:X-Originating-IP;
References: <002a01d718de$c406b820$4c142860$@sympatico.ca>
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Thunderbird/78.8.0
Mirek,

I believe that stall current is the load developed when the motor is not 
able to rotate - the mechanism is locked up - wipers frozen to the 
windshield.  I"m an oldish mechanical engineer, not electrical.  So 
someone else may have a better answer.

Cheers,

Bob Haskell
Austin Healey 3000 BN7/BT7 registrar

On 3/14/21 10:31 AM, m.g.sharp--- via Healeys wrote:
>
> Happy Sunday!,  I am making some decisions on bulbs (and the LED 
> equivalent) for some Lucas Spot lamps I am fitting to my BT7, and I am 
> concerned about the total draw if I have headlamps, spot lamps and 
> wipers on.  I know it is getting close to the measly 22 amp max output 
> of the generator.
>
> The manual has specs for the wiper motor: ?normal running: 2.3 to 3.1 
> amps?. Then is gives ?Stall Current? for the motor hot as 8 amps and 
> for the cold motor 14 amps.  My question is, what is ?Stall Current??  
> The draw is huge compared to the normal running draw.  Also, by cold 
> motor, I assume they mean the wiper motor as I cannot see how the 
> engine temp would matter. However, although I get it that electric 
> motors generate some heat, I don?t think of them as ?warming up?, or 
> running hot or cold, so the huge difference between  ?hot motor? and 
> ?cold motor? stall current further confuses me.
>
> Any help from the electric whizzes out there would be appreciated.
>
> BTW ? regarding bulbs for the Spots, I like the idea of using LEDs as 
> the current draw is so low and the light better, but I find that 
> bright piercing light inconsistent with the character of our cars (a 
> personal preference) and the price of them is almost 3 times a BPF 48 
> W quartz halogen bulb.  I also consider that I have been driving my 
> BT7 for 46 years without spot lamps and got along OK, so I question 
> the need to go to LEDs, other than the advantage of low current draw.  
> Any experiences from those of you who have spot lamps with 
> conventional bulbs and the older low output generator (i.e. BT/BN7 and 
> earlier), would be appreciated.
>
> Cheers, Mirek
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net
>

_______________________________________________

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

ox.team.net


<Prev in Thread] Current Thread [Next in Thread>