Bill
You Bet, the other is www.refdesk.com
It's the best short cut to fast answers I have ever found. The site gives
many, many locators.
Glen
----- Original Message -----
From: "Bill Smith" <WmTSmith@landracing.com>
To: <speedtimer@charter.net>; <basavage@earthlink.net>; <ddahlgren@snet.net>
Cc: <lsr_man@yahoo.com>; <land-speed@autox.team.net>
Sent: Tuesday, April 09, 2002 3:58 PM
Subject: Re: NON LSR web site
> Glen, You really do use that site don't you! wmts
> ---- Original Message ----
> From: Glen Barrett
> Date: Tue 4/9/02 16:54
> To: Bryan A. Savage Jr, Dave Dahlgren
> Cc: Dick J, autox list
> Subject: Re: Tool Making / Welding
>
> Brian
> According to www.howstuffworks.com it's 900 deg. F.
>
> Glen
> ----- Original Message -----
> From: "Bryan A. Savage Jr" <basavage@earthlink.net>
> To: "Dave Dahlgren" <ddahlgren@snet.net>
> Cc: "Dick J" <lsr_man@yahoo.com>; "autox list" <land-speed@autox.team.net>
> Sent: Tuesday, April 09, 2002 3:29 PM
> Subject: Re: Tool Making / Welding
>
>
> > Goofy question for the List:
> >
> > Does anyone have any idea what temperature a self cleaning electric oven
> > gets up to on the self cleaning cycle?
> >
> > Bryan
> >
> >
> >
> > Dave Dahlgren wrote:
> > >
> > > Let it air cool slowly. The slower the better if your wife will let
you
> preheat
> > > the oven to 500 and you put it in there after welding all the better.
> You have
> > > no idea what the metals are and even less equiptment to properly heat
> treat
> > > them. Any of the tool steels or even mild steels are more than strong
> enough to
> > > put in spark plugs no matter what the heat treat might be. Any of the
> other
> > > methods you have mentioned will probably do nothing but crack the weld
> or make
> > > the steel brittle.
> > > Dave Dahlgren
> > >
> > > Dick J wrote:
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/land-speed
|