I can make one on my anvil that i have bolted to the surface grinder table..
For another alternate use of a shop tool. if you stick the tungsten out
about an inch and sharpen the point you can use it as a hot dog roaster if
you put some stainless filler rod in the ground clamp. 1/16 for both works
great!!
Dave
> -----Original Message-----
> From: owner-land-speed@autox.team.net
> [mailto:owner-land-speed@autox.team.net]On Behalf Of John Burk
> Sent: Monday, February 28, 2005 3:15 PM
> To: land-speed@autox.team.net
> Subject: Re: English Wheel Idea
>
>
> Dave
> If the upward force on the spindle is a concern add somthing
> that straddles
> the ram and pushes on the casting .
> John Burk joyseydevil@comcast.net
|