Keith,
When you ran this setup - was it the Quick data that you had hooked to the
light, or did you use the quickdata wheel inputs to feed the Motec (serial
connection) and the Motec controlled the light? Just curious...
JLS
-----Original Message-----
From: land-speed-bounces+lsrvette=yahoo.com@autox.team.net
[mailto:land-speed-bounces+lsrvette=yahoo.com@autox.team.net] On Behalf Of
Keith Turk
Sent: Wednesday, November 07, 2007 9:39 PM
To: Elon; 'land-speed submit'
Subject: Re: [Land-speed] Slip Indicator
magnets... we had Wheel speed indicators on both cars... when we were
running the QuikData system... ( before classic didn't allow data acq. )
K
----- Original Message -----
From: "Elon" <saltfever@comcast.net>
To: "'Keith Turk'" <kturk@ala.net>; "'land-speed submit'"
<land-speed@autox.team.net>
Sent: Wednesday, November 07, 2007 8:36 PM
Subject: [Land-speed] Slip Indicator
> Aha! So that is how the comparison was done. The Motec is out of my league
> but that is a great idea. How did you generate a signal at each wheel? An
> ABS rotor, magnets?
_______________________________________________
lsrvette@yahoo.com
Land-speed mailing list
http://autox.team.net/mailman/listinfo/land-speed
_______________________________________________
Land-speed mailing list
http://autox.team.net/mailman/listinfo/land-speed
|