I get all my transducers at DigiKey. They have a comprehensive website for
just about anything in that arena. They are great sensors have just about
anything. I believe I spent about $80 on one for my fuel system. It was
1/8" pipe and takes a 5v reference voltage. There are others that take a 12V
ref if that is what you need for your system. I think Mayf's application and
systems used are all a 5v reference.
Jon
----- Original Message -----
From: <neil@dbelltech.com>
To: <drmayf@mayfco.com>; <jyturbo@yahoogroups.com>;
<tweecer@yahoogroups.com>; "'LSR'" <land-speed@autox.team.net>
Sent: Sunday, November 11, 2007 12:30 PM
Subject: Re: [Land-speed] Inexpensive Pressure Transducer
> Mayf;
>
> I've seen many pressure transducers on eBay. Most will probably require a
> higher voltage power supply and others are a 4- 20mA current loop output.
> Keep looking and you'll find one.
>
> Regards, Neil Tucson, AZ
>
> -----Original Message-----
> From: land-speed-bounces+neil=dbelltech.com@autox.team.net
> [mailto:land-speed-bounces+neil=dbelltech.com@autox.team.net] On Behalf Of
> drmayf
> Sent: Saturday, November 10, 2007 7:36 PM
> To: jyturbo@yahoogroups.com; tweecer@yahoogroups.com; LSR
> Subject: [Land-speed] Inexpensive Pressure Transducer
>
> I want to record fuel pressure. Anyone know of a cheap transducer that
> will work? I have 5 volts available to power it. I think its range
> should be around 0 - 100 psi. Anybody know of such a cheap beast?
>
> mayf
> _______________________________________________
> webmaster@landracing.com
>
> Land-speed mailing list
>
> http://autox.team.net/mailman/listinfo/land-speed
_______________________________________________
Land-speed mailing list
http://autox.team.net/mailman/listinfo/land-speed
|