land-speed
[Top] [All Lists]

Re: [Land-speed] A Rules Changes Question

To: drmayf@mayfco.com
Subject: Re: [Land-speed] A Rules Changes Question
From: Bryan Savage <b.a.savage@wildblue.net>
Date: Mon, 11 Feb 2008 09:45:21 -0800
Mayf

I think that is an excellent evaluation of the rule. Were I
responsible for that rule, I would eagerly solicit your input.
That rule, as currently written, says you must restrict lateral
head movement in a way that will be antiquate to us.

That does not give me a warm feeling.

Bryan


drmayf wrote:
> I had previously looked throught he changes to the rules and today 
> downloaded the final changes. One particular one seems to me to need 
> some additional discusson. It is a good rule abut the words need some 
> additional comments. That is the one regarding the driver's helmet 
> support. Here is the part that is odd to me:
>
> " Lateral movement: The/* structure*/ shall provide restriction to 
> lateral head movement of less than 2" per side by January 1, 2008. See 
> Section 3.B.1"
>
> I am not tring to be picky here but the use of the word /*structure*/ 
> means, at least to me, the roll cage itself. Not the padding. 
> /*Structure is load carrying*/ while the padding carries no loads. 
> Padding only limits the applied force. So if /*structure*/ is the 
> correct word then less than 2 inches from the roll cage and add SFI 
> padding to that and we are restricted to maybe an inch or less side 
> movement. Is that good? Seems like we need to be able to move our heads 
> around some.
>
> Who should I contact to get a reading on this?
>
> Next, and this one is picky, lol... The same rule says this must be 
> implemented by January 1, 2008.  Don't we really mean the rule is in 
> effect on January 1, 2008? I suspect that cars will be being modified to 
> meet lateral movement rule right up until first meet time and certainly 
> not by January 1, 2008.
>
> And finally, if we are bing so specific as to the wording on the 
> limiting of head movement, what is going to be used to measure it? Are 
> all drivers including alternate drivers going to be required at the 
> first attending meet to get in the car and some sort of gage used to 
> measure on both sides at once?  Will 2.1 inches be allowed? How about 
> 2.05"? The question is how will this actually be measured and when? And 
> what about an alternate driver who may be smaller in stature and the 
> helmet is smaller? The /*structure*/ part of the rule is violated here 
> if it may made to meet the minimum of a larger helmet.
>
> Seems to me that the quoted rule should have said padding may be used to 
> limit the lateral head movement to less that 2 inches of free travel. 
> And padding is any roll bar padding but if just the normal roll cage 
> stuff must be used in conjunction with the sfi stuff.
>
>
> As I mentioned, this is a good rule but it is goping to be hard to apply 
> and keep track of and inspect.
>
> Can we get some solid discussion from any of the rules folk in this? 
> Stuff that will be binding?
>
> mayf.
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Land-speed mailing list


http://autox.team.net/mailman/listinfo/land-speed

<Prev in Thread] Current Thread [Next in Thread>