Skip; I don't think that the rule is quite that open to interpitation.
"Shatter-resistant" clearly excludes any cast acrylic plastic. Whether it be
Plexiglas or some other manufactures product. I believe the book suggests a
polycarbonate such as GEs Lexan because that's the most common
shatter-resistant plastic. But not the only one. If you have something else
that's better, by all means use it. My 1977 rule book is almost word for
word the same and I have always understood the meaning of the rule. It used
to be odd that motorcycle windscreens could be Plexiglas and cars could not.
I don't know what the motorcycle requirements are now.
----- Original Message -----
From: "Skip Higginbotham" <saltrat@pahrump.com>
To: "Rich Fox" <v4gr@rcn.com>; "James Tone" <gmc6power@earthlink.net>;
<land-speed@autox.team.net>
Sent: Friday, April 17, 2009 10:07 AM
Subject: Re: [Land-speed] Drilling Plexiglass
> Rich,
> I think that if Plexiglas not allowed, then the rulebook (I haven't
> received mine yet either) should specifically point that out. And not
> leave it up to interpretation. How does one judge what "shatter resistant"
> really is? Acrylics are plastics.
> Skip (My canopy is of LEXAN in any case)
>
>
>
>
> At 09:17 AM 4/17/2009, Rich Fox wrote:
>>My 2008 book (new book not here YET) says "All non-stock windows and
>>windshields shall be made of shatter-resistant plastic, such as
>>polycarbonate (Lexan)---. Since Plexiglas is a cast Acrylic and is very
>>much not Shatter resistant I believe this rules it's use out.
>>----- Original Message ----- From: "Skip Higginbotham"
>><saltrat@pahrump.com>
>>To: "James Tone" <gmc6power@earthlink.net>; <land-speed@autox.team.net>
>>Sent: Friday, April 17, 2009 9:04 AM
>>Subject: Re: [Land-speed] Drilling Plexiglass
>>
>>
>>>JD,
>>>Paragraph 3.U suggests LEXAN but does not appear to disallow any
>>>plastic..........to what do you refer? Rich is right, LEXAN is much more
>>>forgiving.
>>>
>>>Thanks,
>>>Skip
>>>
>>>
>>>At 07:03 AM 4/17/2009, you wrote:
>>>>I'm not sure but I think "plexiglass" in not allowed. I believe "Lexan"
>>>>(GE Patent) cast acrylic, or certain Polycarbonates (SP?) is allowed as
>>>>Rich says.
>>>> >
>>>> >Most windows in my car are Lexan which is much more forgiving.
>>>>When drilling
>>>> >Plexiglas (cast Acrylic) I use center or spotting drills. Works well.
>>>> > >RF
>>>> >----- Original Message -----
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Land-speed mailing list
http://autox.team.net/mailman/listinfo/land-speed
|