land-speed
[Top] [All Lists]

Re: [Land-speed] Off Toopic: 1991 F150 Truck Issues

To: <drmayf@mayfco.com>, <tweecer@yahoogroups.com>, "'LSR'"
Subject: Re: [Land-speed] Off Toopic: 1991 F150 Truck Issues
From: <neil@dbelltech.com>
Date: Mon, 27 Jul 2009 11:13:52 -0700
Mayf;

Check the distributor rotor / cap phasing.

Regards, Neil   Tucson, AZ

-----Original Message-----
From: land-speed-bounces@autox.team.net
[mailto:land-speed-bounces@autox.team.net] On Behalf Of drmayf
Sent: Monday, July 27, 2009 6:36 AM
To: tweecer@yahoogroups.com; LSR
Subject: [Land-speed] Off Toopic: 1991 F150 Truck Issues

I spent 17 hours this week end with another guy and we made some very 
good progress on the truck.  Itseemed that everything we touched had to 
be redone in some form or fashion.  After being tolf that the exhaust 
manifolds, the cast iron ones, were the same as what came off the truck 
to begin with, when trying to fit up the down pipes, fout out otherwise. 
Finally located a y pipe that fir the motor with odd manifolds, but no 
O2 bung.  Some connectors not connected.  Late yesterday found a 
connector a the far back end of the manifold not connected. Suspect it 
is for a knock sensor but this block has no knock sensor threaded hole 
location.  The engine runs great above 2000 rpm. Runs like crap at 1000 
rpm. I have run out of ideas and gumption in working on this thing.  If 
there are any other ideas about why it would not run at 1000 but runs 
like a scalded dog at 2000 lemme know and I will pass it along..

See ya'll on the salt...

mayf
_______________________________________________
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Land-speed mailing list


http://autox.team.net/mailman/listinfo/land-speed

<Prev in Thread] Current Thread [Next in Thread>