Sparky, They make a tool called "little giant" that does the job. Myself, I
cut the outer race off with a hand grinder then use a grinder to narrow the
inner race, then use a air hammer with a sharp chisel and off it comes. A
regulator bearing puller in the press works also but I like to cut the outer
race off first so the bearings don't come flying if it breaks.
Doug Odom in big ditch
----- Original Message -----
To: "AA list" <firstname.lastname@example.org>
Sent: Sunday, August 30, 2009 8:48 AM
Subject: [Land-speed] TOOL for Ford 9" axel brg removal
> anyone have suggestions for a source for the special tool for use with the
> press for this job?
Support Team.Net http://www.team.net/donate.html
Land-speed mailing list